Softshell jackets with logo for CSV Umweltschutztechnik – heat-press printing on workwear
In November 2026 we finished 14 softshell jackets for CSV Umweltschutztechnik GmbH from Hamburg with the company logo on the back. In heat-press printing, the design is permanently bonded to the fabric with heat and pressure – turning workwear into a visible brand presence.
Project at a glance
- Client
- CSV Umweltschutztechnik GmbH, Hamburg
- Date
- November 2026
- Service
- Textile finishing of work jackets with company logo
- Quantity
- 14 softshell jackets
- Method
- Heat-press (transfer) printing with heat and pressure on a transfer press
- Design
- Logo with “Umweltschutztechnik-GmbH” lettering in white, large on the back
- Garment
- Navy and black softshell jackets with reflective piping
The client
CSV Umweltschutztechnik GmbH from Hamburg has specialised for more than 25 years in the environmentally and health-friendly remediation of pollutants in buildings – including mould and water damage remediation.
We had already printed sweatshirts with the company logo for CSV. Now the team’s work jackets were to get a matching design, so employees are recognisable at a glance on customers’ sites.
The challenge
Softshell jackets are not simple T-shirts: the material is stretchy, coated and heat-sensitive, and seams, reflective piping and coloured panels limit the free area on the back.
Even so, the logo with its long lettering had to be large, straight and in exactly the same place on every jacket – and still look good after many jobs and washes.
How we did it
First we matched the logo to the back width of the jackets and prepared it as a transfer on carrier film. On the transfer press each jacket was laid flat and the design was measured from the collar with a folding rule and aligned – so the logo sits at the same height on every jacket.
The design was then transferred with matched temperature, time and pressure, and the carrier film peeled off. We adjusted the settings to the softshell material so the fabric does not shine or distort.
The result
All 14 jackets now carry a crisp, opaque white logo that stands out clearly from the navy fabric. The print is flexible, moves with the material and is permanently bonded to the textile.
Together with the sweatshirts, the CSV team now has a consistent look – on site, with customers and on the way there.
Behind the scenes
Why heat-press printing for workwear?
Precise, sharp-edged design – even fine lettering and lines
Durable and wash-resistant with proper care
Suitable for softshell, fleece, cotton and blends
Cost-effective even for small quantities
Can be combined with embroidery, e.g. embroidered front logo plus back print
Want workwear with your logo?
We print and embroider jackets, shirts, polos and sweaters with your logo – from design to finished garments, even in small quantities.







